What Elector PSP is (and is not)
Elector PSP is a liquid spinosad concentrate mixed with water and applied as a coarse or low-pressure spray. The active ingredient is listed as 44.2% spinosad. Elanco markets it for house flies, darkling beetles and northern fowl mites, and the US label also covers poultry red mites (Dermanyssus gallinae).
It is not a fogger, space spray or feed additive. The label says not to apply as a fog or space spray, and to cover or remove exposed feed and water before premise work. Poultry may be present during premise treatment when you follow the label; that does not mean you skip PPE or skip reading the booklet.
For mite ID and the bird-versus-housing split, start with the site checklist on how to get rid of chicken mites. This page is only the Elector dilution and target table.
Label dilution table (US EPA Reg. No. 72642-2)
Figures below are transcribed from the US Elector PSP / Extinosad PSP stamped label directions. Always match the printed label on your container if wording differs by year or state sticker.
| Target | Mix | Coverage / bird limit | Where to aim | Re-application note on label |
|---|---|---|---|---|
| Northern fowl mites (Ornithonyssus sylviarum) | 3 fl oz product in 10 gal water | No more than 1 gal spray per 100 birds | Coarse spray to birds; saturate the vent area | Egg-producing poultry: every 14 days as needed |
| Poultry red mites (Dermanyssus gallinae) | 2 fl oz product in 5 gal water | That dilution treats 2,500 ft² | Cracks, joints, bent surfaces, dust pockets where mites rest by day | Premises treatment; penetrate day harborage |
| House flies, stable flies, little house flies | 2 fl oz (60 mL) in 10 gal water | Treats about 5,000 to 10,000 ft² | Resting surfaces; early morning; no run-off | Every 7 to 10 days as needed |
| Darkling beetles / hide beetles | 2 fl oz treats 5,000 ft² (severe: 4 fl oz / 5,000 ft²) | Low volume up to 15 gal / 20,000 ft²; moderate up to 40 gal / 20,000 ft² | Litter, feed and water lines, walls, beams, cracks | Reapply after grow-out or sanitation |
Active ingredient 44.2% spinosad. Shake well; avoid freezing; mix fresh. Do not use less than the labeled rate.
Backyard workflow that matches the label
Decide the pest first. Northern fowl mites stay on birds and cluster at the vent; red mites hide in housing by day and feed at night. Elector has separate mixes for those two targets. Using the bird mix on empty roosts, or the red-mite mix as your only bird spray, wastes product and leaves the reservoir.
Mix only what you will spray that day. Fill the tank about halfway with water, start agitation, add the measured fl oz, then top up. The label asks for fresh spray each use and enough agitation to keep the mix even.
For northern fowl mites, keep the spray coarse and spend the gallon budget on vents, not on soaking the whole yard. For red mites, pressure has to reach joints and undersides of bars; a light mist on open floor boards is not the job the label describes.
Repeat on the schedule the label allows for that pest. Extension mite pages still remind keepers that eggs survive the first pass, which is why a single Saturday spray rarely ends an outbreak even when the chemical is correct. Pair Elector with the cleanup steps in the chicken mites guide.
- Vent cluster in daylight points to northern fowl mites; night roost checks and empty-coop survivors point to red mites.
- Use the fl oz rate from the table for that pest. Do not guess from a forum photo of someone else's measuring cup.
- Remove or cover exposed feed and water before premise spray. Do not contaminate watering gear.
- Birds: vent saturation within the 1 gal / 100 birds cap. Housing: cracks and dust harborage for red mites.
- Northern fowl mites on layers: label allows re-application every 14 days as needed. Flies: 7 to 10 days. Plan cleanup between passes.
Eggs, meat and what the US label does not spell out here
The mite and fly application tables on the US stamped label used for this page do not list a numeric egg or meat withdrawal period in those rows. Retail sheets sometimes advertise "no egg withdrawal." That claim is marketing language until you confirm it on the exact label panel shipped with your bottle and any state or veterinarian instruction that applies to your flock.
If your birds are for food and the printed label is unclear, stop and ask a poultry veterinarian or your cooperative extension office before you spray and before you sell or eat eggs. Do not invent a withdrawal day from a social media thread.
Rotate chemistries across a season when flies or beetles are the main problem. The label's resistance section tells users not to rely on one insecticide class alone and to keep cultural cleanup in the program.
Questions people ask
What dilution is Elector PSP for northern fowl mites?
Read the northern-fowl-mite row in the dilution table: three fluid ounces of concentrate per ten gallons, with a hard cap of one gallon of finished mix for every hundred animals, focused on the vent feathers.
What dilution is Elector PSP for poultry red mites?
Use the red-mite row: two fluid ounces per five gallons, sized for twenty-five hundred square feet of cracks and daytime harborage rather than a whole-bird soak.
Can birds be in the coop during an Elector premise spray?
Premise work may proceed with birds in the house if you follow the booklet, keep feed and water covered, and reserve the on-animal mix for vent-cluster parasites living on the flock rather than for crack-dwelling red mites.
How often can I re-spray for northern fowl mites?
On layers the booklet permits another pass after two weeks when pressure remains. Clean the housing between sprays so hatchlings are not waiting in the litter.
Is Elector PSP the same as Extinosad PSP?
Extinosad PSP is the EPA product name on older stamped paperwork; Elector PSP is the brand name on the same registration (72642-2). Match rates to the booklet that came with your bottle.